MPL – 연안해양역학응용 연구실
하구·연안2024. 6. 18.  ·  Myung Hwan Kim
  • 수치모델링
  • 관측
Mechanisms of stratification near coastal regions due to periodic discharge from a tidal power plant

Figure 1. Map showing a model domain and bathymetry for (a) Gyeonggi Bay, (b) near coastal regions of the Sihwa tidal power plant (Sihwa TPP), and (c) sluice gates of Sihwa TPP. In (b), red circles indicate mooring stations (M01 and M02) located south part of the Incheon North Port (INP). The red and yellow lines in (c), represent the location of sluice gates and hydraulic turbine gates, respectively. Flow direction of each discharge stage of the Sihwa TPPis described by the yellow and red arrows in (c).

Mechanisms of stratification near coastal regions due to periodic discharge from a tidal power plant

Figure 2. Comparison between observed and modeled data: (a and b) along-channel velocity and (c and d) salinity at 1.5 m above the bed (mab). Black dots and red lines indicate observed and modeled data, respectively.

Mechanisms of stratification near coastal regions due to periodic discharge from a tidal power plant

Figure 3. Time series of observed data at M01 (a, c, and e) and M02 (b, d, and f) during spring tide: (a and b) tidal elevation, (c and d) near-bed salinity, and (e and f) near-bed temperature.

Mechanisms of stratification near coastal regions due to periodic discharge from a tidal power plant

Figure 4. Modeled current and salinity fields at near-surface for the (a) generation and (b) drain phase on April 2, 2022: The salinity was shown as a contour, and current velocity was shown as vectors. Red and blue dots denote P1 and P2, respectively. (c) Comparison of near-surface salinity at P1 and P2: the red and blue lines represent time-varying salinity at P1 and P2, respectively. In (c), black line indicates difference of near-surface salinity between P1 and P2 (P2−P1).

Mechanisms of stratification near coastal regions due to periodic discharge from a tidal power plant

Figure 5. Time series of vertical profiles at P1 (a, c, and e) and P2 (b, d, and f). The ratio of (c and d) squared buoyancy frequency (N2) and (e and f) squared vertical velocity shear (S2) is used to produce (a and b) gradient Richardson number (Rig) during spring tide. White lines in (a and b) indicate critical Rig value for density stratification.

사업명
항만 퇴적 저감시설 및 적용 방안 연구용역
발주처
해양수산부
← 전체 연구